Sαbbαgh ETAβS

Developing and working on ETABS, SAP2000, and SAFE

Compatible with ETABS 2016,2017,2018,2019,2020,2021, SAP2000 V20,V21,V22,V23,V24,V25 SAFE V20 , V21

Slide 1

Flexible Combinations

Slide 2

Edit Combinations

Slide 3

Convert Combinations

Slide 4

Auto Beams Releases

Slide 5

Scaling of Static base shear to Dynamic RSA base shear

Slide 6

Piles

Slide 7

Piles

Slide 8

Create a typical SAP2000 Model S2K for under-ground water tank

Slide 9

Calculate k, effective length factor

Slide 10

Calculate δns, for Non Sway Columns using one of 3 ways

Slide 11

Check Slenderness effects according to ACI318

Slide 12

Select beams, columns, and walls with advancing ways

Slide 13

Display Columns/Piers reinforcement information

1- Easily definition construction materials, and sections for beams, columns, walls, and slabs.

2- Assign Modifiers easily and quickly.

3- Create a “Response Spectrum Load Case” easily and quickly for normal cases and for move mass cases.

4- Combinations :

• Edit, Save, and Open Combinations.
• Create all types of combinations according to your code.
• Convert your combinations From ETABS/SAFE/SAP To ETABS/SAFE/SAP.
• Make an envelope for your combinations easily.

5- Assign beam releases easily and quickly.

6- Check the minimum depth of beams according to ACI318.

7- Mange and design piles with ETABS and SAFE.

8- Buckling :

• Calculate k, the effective length factor , and assign it in columns in ETABS.
• Check Slenderness effects according to ACI318.
• Calculate δns, for Non Sway Columns using one of 3 ways according to ACI318 , and assign it in columns in ETABS.

9- Check if the selected columns’ SMRF joints in last story need to 6/5 check according to ACI 318.

10- Display Columns/Piers reinforcement information.

11- Select beams, columns, and walls with advancing ways.

12-Easily and fast Create a typical SAP2000 Model S2K for under-ground water tank (2 typical types)